|
|
NEW! FM Equipment
FM Exciters/Transmitters All
Nicom FM exciter/transmitters are approved by the FCC and IC
NT250/LCD Phase Locked Loop Programmable
FM Exciter/Transmitter 87.5 - 108 MHz Range |
|
- Contains a low-pass/harmonic filter
- Instantly programmable from the front panel
- Adjustable power output (5-250W)
- Remote on/off control and metering of forward & reflected power
- Password-protected settings
- Optional RS232 compatibility
- Optional software for remote monitoring via PC available
- Optional FSK ID Keyer
-
Technical specifications
|
NT150/LCD Phase Locked Loop Programmable
FM Exciter/Transmitter 87.5 - 108 MHz Range |
|
- Contains a low-pass/harmonic filter
- Instantly programmable from the front panel
- Adjustable power output (5-150W)
- Remote on/off control and metering of forward & reflected power
- Password-protected settings
- Optional RS232 compatibility
- Optional software for remote monitoring via PC available
-
Technical specifications
|
NT30 Phase Locked Loop Programmable
30W FM Exciter/Transmitter (87.5-108 MHz) |
|
- Contains a low-pass/harmonic filter
- Instantly programmable from the front panel
- Adjustable power output (2-30W)
- Remote on/off control and metering of forward & reflected power and internal
temperature
- Constructed of conservatively-rated components, with a modular
design
- Password-protected settings
- 24-volt power capability
- Optional remote modulation metering
- Optional FSK ID Keyer
-
Technical specifications
|
NT20 Phase Locked Loop Programmable
20W FM Exciter/Transmitter (87.5-108 MHz) |
|
- Contains a low-pass/harmonic filter
- Instantly programmable from the front panel
- Adjustable power output (2-20W)
- Remote on/off control and metering of forward & reflected power, modulation, and
internal temperature
- Constructed of conservatively-rated components, with a modular
design
- Password-protected settings
- Optional FSK ID Keyer
-
Technical specifications
|
|
FM Amplifiers All Nicom FM
amplifiers meet or exceed current FCC and CCIR standards
NA2001 2kW FM Broadband MOSFET Amplifier
(87.5-108 MHz) |
|
- High-gain PA, generally capable of at least 2000W output with 20W drive input power
- Automatic gain control
- No tuning required
- Easily replaceable component parts
- Contains an advanced recycling overload and protection system
- Can perform proportional auto-foldback of output power
- Remote control and telemetry capable
-
Technical specifications
|
NA1001 1kW FM Broadband MOSFET Amplifier
(87.5-108 MHz) |
|
- High-gain PA, generally capable of at least 1500W output with 15W drive input power
- Automatic gain control
- No tuning required
- Easily replaceable component parts
- Contains an advanced recycling overload and protection system
- Can perform proportional auto-foldback of output power
- Remote control and telemetry capable
-
Technical specifications
|
NA501 500W FM Broadband MOSFET Amplifier
(87.5-108 MHz) |
|
- High-gain PA, generally capable of at least 500W output with 10W drive input power
- Automatic gain control
- No tuning required
- Easily replaceable component parts
- Contains an advanced recycling overload and protection system
- Can perform proportional auto-foldback of output power
- Remote control and telemetry capable
-
Technical specifications
|
|
STL Systems
TSL 910-RSL 900 Composite Aural STL System |
|
- Front-panel adjustable 0-12W output power
- RS232 built-in remote control
- Frequency can be externally programmed
- Contains 3 SCA’s
- Front-panel monitoring of RF (on the transmitter), and IF (on
the receiver)
- Password-protected settings
- Includes monitoring software
- Meets or exceeds current FCC and CCIR standards
-
Technical specifications
|
|
Remote Pick-Up Systems
NRPU01 / NRPU/R
Remote Pick-Up System |
|
- Highly flexible remote system
- 3 XLR inputs that can be used as microphone or line inputs
- 2 adjustable monitor headphone outputs
- Contains a meter that indicates forward & reflected power,
modulation, and battery status
- Easy switching between F1 and F2
- Runs on 100-240VAC, on a car battery when using the external
power input connector, or on an optional battery pack
- Transmitter works with either a whip antenna or a light
directional antenna (receiver requires a directional antenna)
- Transmitter can contact receiver using a built-in sub-audio tone
- Optional battery pack (12VAC@12A)
-
Technical specifications
|
|
Translators and Translator Packages
NTR30 Front Panel Programmable FM Translator
System (87.5-108 MHz Range) |
|
NT30 Transmitter |
|
NLRFM1 Receiver |
|
- Up to 30W ALC adjustable via front panel
- Instant front panel programmability in 10 kHz increments
- High frequency stability is ensured by the Phase Locked Loop
circuit with a minimal drift quartz crystal
- Power, deviation, and frequency are controlled and shown on LCD
front panel
- Compact 2 + 1 units (three rack spaces total)19" rack
- Excellent RF immunity
- Modular construction
- Forced ventilation cooling
- AC/DC switching power supply
- 24 V DC capability (on NT30)
- MOSFET technology inside
- FSK ID Keyer optional
- Transmitter remote control capability (RS232) (optional)
- Software for monitoring remote control features including
internal temperature, turning transmitter off/on, and changing
transmit frequency is provided (optional)
- FCC and IC Certified
-
Technical specifications
|
Or build your own translator package! Details
here |
|
FM Receivers
NLRFM1 High Fidelity FM Receiver
87.5-108 MHz Range |
|
- FM Receiver for rebroadcast applications or station monitoring
- State of the art sound quality
- Dynamic selectivity
- 100 microvolts stereo sensitivity
- Great performance in the presence of strong electromagnetic
fields
- Unbalanced audio mpx output
- Bandpass filter included
-
Technical specifications
|
|
|
Spry Group Multimedia, LLC is an authorized NicomUSA distributor. |
Most product images and description information from licensor websites. Product names and designs are trademarks, in some
locations registered, of their respective owners.
|
|
|